File Pull-Down Menu; Figure 5-10 Scpc Main Screen; Figure 5-11 File Menu In Maintenance Mode - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
To exit the HCI, select File  Exit or click on the X at the upper right hand side of the
window. You will be asked to confirm the operation.
Exit stops the HCI application only. The Modem will continue to run.
5.6

File Pull-Down Menu

An enhanced File pull-down menu is available while in Maintenance Mode. The
enhancements to this pull-down menu are:
Restore Config. (See Figure 5-11) During any other Mode, only the Exit menu option is
available.
a. Select File to open the drop-down menu.
b. Select appropriate command you wish to complete.
Refer to Table 5-1 File Configuration for data descriptions for this window.

Figure 5-10 SCPC Main Screen

NOTE

Figure 5-11 File Menu in Maintenance Mode

5-6
Save Config, Save Config As, and
1000-7075 Rev E