L3 Communications MPM-1000A Operator's Manual page 15

MPM-1000A Operator Manual
If the Control Display Unit (CDU) port address is changed and the
Personal Computer (PC) can no longer talk to the CDU port, the
Modem may be rendered inoperable. Contact your System
Administrator to make any changes to this window.
Performing calibration with incorrect settings may cause severe
damage to the Antenna. Please ensure you are familiar with all
parameters that may be entered and the impact they have on the
Transmit Chain Gain Factor (TCGF). Please check your Antenna
manufacturer specifications prior to changing any of the following
settings.
If you increase the Modem TX Power Setting above the Antenna's
Maximum power rating, the pop-up box below will appear. If you
proceed, you may damage your equipment.
CAUTION
CAUTION
CAUTION
xv
1000-7075 Rev E