MPM-1000A Operator Manual
j. Select the desired "loss" file to load. (See Figure 6-31)
k. Click Open and a File Validation Successful! Message pops up. (See Figure
6-32)
l. Click OK.
m. Once the files have been loaded, select OK and the Terminal Calibration window
will close.
6.5.2 Manual Entry Method
a. Select Configure → Terminal Calibration. (See Figure 6-33)
b. Check the box Terminal Calibration State ON. (See Figure 6-34)
Figure 6-31 Terminal Losses File Screen
Figure 6-32 File Validation Successful
Figure 6-33 Configure Menu
6-25
1000-7075 Rev D