Figure 6-17 Configure Drop Down Menu; Figure 6-18 Multi-Modem Configuration Screen - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
j. Click on the Master. Once the Master Modem has been highlighted, the
Configure SLAVE Button will be active. (See Figure 6-18)
Refer to Table 6-8 Multi-Modem Status Screen for data descriptions for this window.
k. Select Configure SLAVE. A pop-up box will appear. (See Figure 6-19)

Figure 6-17 Configure Drop Down Menu

Figure 6-18 Multi-Modem Configuration Screen

6-16
1000-7075 Rev D