Figure 7-2 Transec Screen - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual 1000-7075 Rev E

Figure 7-2 TRANSEC Screen

NOTE
Zeroize not only wipes all loaded keys and key derived items, it also
disables the Modem data port (J1). The Keys and Pass Phrases may
be reloaded after a Zeroize, but to recover the data port, the Modem
must have the power cycled. If the HCI is communicating via the data
port, the HCI COMM fault will occur and there will be no HCI control
until you cycle power to the Modem. Sections 15.1 through 15.15
contain a description of the TRANSEC implementation and key
generation process.
7-2