MPM-1000A Operator Manual
Control/Indicator/Function
Edit button
Delete button
6.3.5 Bandwidth Segment Edit Dialog
You use this dialog to edit a selected bandwidth segment. (See Figure 6-8)
Uplink center frequency and downlink center frequency are required
fields. The Ruggedized Modem software uses these frequencies,
along with the block converter frequencies, to compute transmit and
receive frequencies:
Modem Frequency = Satellite Frequency – Block Converter
Refer to Table 6-7 Edit Bandwidth Segment for data descriptions for this window.
Figure 6-8 Edit Bandwidth Segment Dialog using Transfer Gain
Table 6-6 Bandwidth Segments
Allows the selected bandwidth segment‟s parameters to be modified.
(Select a line by clicking on the button to the left of the line).
Deletes the selected bandwidth segment.
Note
Frequency
6-8
Description
1000-7075 Rev D