System Shutdown; Figure 5-8 Select Mode Screen; Figure 5-9 Network Main Screen - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
c. Select OK. Once the Modem has finished initializing the Maintenance Mode, the
system will be in the Maintenance.
5.5

System Shutdown

Exiting the HCI does not terminate Modem operation.
a. To stop the Modem in NCW mode, click on Network → Terminate.
b. To stop the Modem in SCPC mode, select TX Power → Enable → No.

Figure 5-8 Select Mode Screen

NOTE

Figure 5-9 Network Main Screen

5-5
1000-7075 Rev E