Ncw Message Tab; Figure 9-4 Ncw Message Tab - L3 Communications MPM-1000A Operator's Manual

Ruggedized ip modem

Table of Contents

MPM-1000A Operator Manual

9.2.2 NCW Message Tab

This page repeats the Terminal list from the Network page and shows the log of

messages sent and received. Right-click on an entry in the Network Terminal List to

bring up the Send Message dialog. Each message allows a maximum of 255

characters. Double-clicking on a message entry will display the full message. Right-click

in the Short Message Log list to select "Clear, Print and Save To File" options.

An audible indication is provided when a short message is received.

The sound associated with this audible indication needs to be named

"beep.wav" and must be located in the same directory as the Modem

HCI executable file (typically "C:\Program Files\L-3 Communications,

Linkabit Division\IP Modem HCI"). If that file does not exist, then the

audible indication will be a beep tone at 500 Hz for a 1/2 second.

Refer to Table 9-2 NCW Message Tab for data descriptions for this window.

When you are not viewing the Message Tab and a message is received, a flashing

visual indication of a "New Message" has arrived will be located in the bottom right

status field of the HCI application.

Note

9-5

1000-7075 Rev E

Table of Contents