Appendix 6 Added And Changed Functions - Mitsubishi Electric NZ2GN2S1-16D User Manual

Appendix 6
The functions added to or changed in the I/O module are shown.
Added functions
The following table shows the functions that were added to the I/O module and the versions supporting these functions.
Details of addition
Communication speed setting function
CC-Link IE TSN Network synchronous
communication function
• Synchronous X/Y control mode
Ring topology
"Station Information List" window display
CC-Link IE TSN Network synchronous
communication function
• Synchronization cycle timing control mode
• Set time synchronization control mode
*1 The function can be used regardless of the version.
Function changes
The following table shows the functions that were changed in the I/O module and the versions supporting these functions.
Details of change
Setting values of the communication cycle
interval setting
Setting values of the communication cycle
interval setting
Operation in multicast mode
APPX
256

Appendix 6 Added and Changed Functions

Added and Changed Functions
Firmware version Profile version
"02" or later "01" or later
"03" or later "02" or later
*1

"03" or later
*1
"03" or later 
"05" or later "03" or later
Firmware version
"02" or later
"03" or later
"03" or later
Reference
Page 175 Communication Speed Setting Function
Page 157 CC-Link IE TSN Network Synchronous
Communication Function
Page 152 Network topology setting
Page 193 Checking station information
Page 157 CC-Link IE TSN Network Synchronous
Communication Function
Reference
Page 151 Communication cycle interval setting
Page 151 Communication cycle interval setting
Page 152 Communication mode