Appendix 10 Added Or Changed Functions; Appendix 10.1 C Controller Module Upgrade; Appendix 10; Q24Dhccpu-V - Mitsubishi Electric MELSEC Q Series User Manual

Appendix 10

Functions and specifications of the CPU module are added and/or changed at each version upgrade.
Available functions and specifications differ according to the function version and serial number of the CPU module.
Appendix 10.1
The following table shows the functions and specifications which are supported according to the upgrades.
Appendix 10.1.1
Serial No. Software version
14122 Ver.4.01B
15042 Ver.4.02C
15102 Ver.4.04E
16012 Ver.4.06G
*1 : When the parameter is written with Setting/monitoring tools for the C Controller module version 4.01B or earlier, the password set to
"Security password setting" on the <<Security settings>> tab is initialized.
490
Added or Changed Functions
C Controller module upgrade

Q24DHCCPU-V

Added function
The following CPU modules are supported.
• Universal model QCPU
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
The security function is supported.
• File access restriction function
*1
• Service setting function
The SLMP (MC protocol) is supported.
The following CPU modules are supported.
• High Speed Data Communication Module
QJ71DC96
• Analog conversion module
Q64ADH, Q68CT, Q64DAH
• QD70 type positioning module
QD73A1
®
• MODBUS interface module
QJ71MB91,QJ71MT91
• Energy measuring module
QE81WH, QE84WH, QE81WH4W, QE83WH4W, QE82LG
The following CPU modules are supported.
• Simple motion module
QD77MS2, QD77MS4, QD77MS16, QD77GF16
The following function are supported.
• CCPU_GetCounterMillis
• CCPU_GetCounterMicros
• CCPU_GetCounterMillis_ISR
• CCPU_GetCounterMicros_ISR
• QBF_REMTO
• QBF_REMFR
The advanced synchronous control method for Q172DSCPU and
Q173DSCPU is supported.
The following function are supported.
• QBF_MotionCHGAS
• QBF_MotionCHGVS
*1
Reference
Page 27
Page 176, Section
11.8
Page 200, Section
12.2
Page 96, Section 7.5
Page 96, Section 7.5
Page 353, Section
20.2
–
Page 356, Section
21.2