Restore Default Parameters (Obj. 1011H)]; [Restore Default Parameters (Obj. 1011H: 00H)]; [Restore All Default Parameters (Obj. 1011H: 01H)] - Mitsubishi Electric MELSERVO-J5 MR-J5 Series User Manual

2.7

[Restore default parameters (Obj. 1011h)]

[Restore default parameters (Obj. 1011h: 00h)]

Data Type Access
U8 RO
Description
The total number of Sub Indexes is returned.
Default Range
01h 01h (fixed)

[Restore all default parameters (Obj. 1011h: 01h)]

Data Type Access
U32 RW
Description
All parameters (servo parameters and network parameters) that can be stored in the non-volatile memory can be reset to the
factory setting. To reset the servo parameters and network parameters to the factory setting, write "64616F6Ch" (= reverse
order of ASCII code of "load") in this object, and cycle the power or reset the software.
When a multi-axis servo amplifier is used, the servo parameters of all axes are initialized.
The read value is always "1" (initializing values).
2 General Objects
20
2.7 [Restore default parameters (Obj. 1011h)]
Mapping Default

Impossible
Description
Sub Index 1 is supported.
Mapping Default
Impossible 00000001h
Range Units
 
Range Units

00000000h to
FFFFFFFFh
Save Parameter

Impossible
Save Parameter

Impossible