Table of Contents
Advertisement
Trip Code — Displays NERR if there are no errors, or displays the active fault. See
page 192
for a listing of the possible fault codes.
Main Monitor Selections
Two (2) qualifying Monitor Mode items may be selected from the Main Monitor Selections screen to be
displayed on the Frequency Command screen.
The selected items, along with their real-time values, are displayed on the Frequency Command screen
while the WX9 ASD is running. Not all Monitor Mode items are available for display on the Frequency
Command screen. The available items are underlined on pg. 45.
Any two of the underlined items may be selected from the listing at Program Utilities Main Monitor
Selections. Select an item from the Monitor 1 listing and another item from the Monitor 2 listing to be
displayed as shown in
.
WX9 ASD Installation and Operation Manual
Figure 22 on pg. 34
(VLP Technology Average and VI Input shown).
Table 14 on
47
Advertisement
Table of Contents
