Table of Contents
Advertisement
Startup Wizard Requirements
The Startup Wizard assists the user with the initial configuration of the WX9 ASD by querying the
user for information on the frequently used ASD control settings and system operational specifications.
The WX9 ASD may also be setup by directly accessing each of the settings via the Program menu or
the Direct Access Number for each item (see the section titled
pg. 69
for specifics on each parameter). Application-specific settings may still be required upon
completion.
The Startup Wizard is launched from the Program menu.
Select the input power specifications or click Manually Configure-Finish to exit.
Input the required information into the following screens to complete the Startup Wizard. Click Next
or Finish after each window. Next opens the next Startup Wizard window. Finish returns the system
to the
Frequency Command Screen.
1. Voltage and Frequency Rating of the Motor
Motors are designed and manufactured for operation
within a specific voltage and frequency range. The
voltage and frequency specifications for a given motor
may be found on the nameplate of the motor.
Settings:
2 — 380v, 50Hz
3 — 460v, 60Hz
2. Upper-Limit Frequency
This parameter sets the highest frequency that the
WX9 ASD will accept as a frequency command or
frequency setpoint. The WX9 ASD may output
frequencies greater than the Upper-Limit Frequency
(but less than the Maximum Frequency) when
operating in the PID Control mode, Torque Control
mode, or the Vector Control modes (sensorless or
feedback).
3. Lower-Limit Frequency
This parameter sets the lowest frequency that the WX9
ASD will accept as a frequency command or
frequency setpoint. The WX9 ASD will output
frequencies lower than the Lower-Limit Frequency
when accelerating to the lower limit or decelerating to
a stop. Frequencies below the Lower Limit may also
be output when operating in the PID Control mode,
Torque Control mode, or the Vector Control modes (sensorless or feedback).
66
Direct Access Parameter Information on
WX9 ASD Installation and Operation Manual
Advertisement
Table of Contents
