Toshiba WX9 ASD Installation & Operation Manual page 182

F731
Low Output Disable Control and Stopping Method
Program Motor Low Output Disable Function
The Low Output Disable Control and Stopping Method Enables/Disables
the Low Output Disable function and, if enabled, selects a stopping method.
Settings:
0 — Disabled
1 — Enabled (Deceleration Stop)
2 — Enabled (Coast Stop)
Low Output Disable Start Level
Program Motor Low Output Disable Function
The Low Output Disable Start Level sets the output frequency threshold that,
if exceeded, will initiate the LOD function.
Low Output Disable Start Time
Program Motor Low Output Disable Function
The Low Output Disable Start Time sets the amount of time that the LOD
Start Level criteria must be met and maintained for the LOD function to be
initiated.
Low Output Disable Setpoint Boost
Program Motor Low Output Disable Function
The Low Output Disable feature adds the user-input frequency value to the
commanded frequency.
Low Output Disable Boost Time
Program MotorLow Output Disable Function
The Low Output Disable Boost Time sets the on-time timer for the LOD
Boost function.
Once expired, the LOD Boost function ceases.
170
Direct Access Number — F731
Parameter Type — Selection List
Factory Default — Disabled
Changeable During Run — No
Direct Access Number — F732
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Maximum — Maximum Freq. (F011)
Units — Hz
Direct Access Number — F733
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — Yes
Minimum — 0.0
Maximum — 3600.0
Units — Seconds
Direct Access Number — F734
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Maximum — Maximum Freq. (F011)
Units — Hz
Direct Access Number — F735
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — Yes
Minimum — 0.0
Maximum — 3600.0
Units — Seconds
WX9 ASD Installation and Operation Manual
F735