Typical Connection Diagram
Figure 20. WX9 ASD Typical Connection Diagram.
Note:
When connecting multiple wires to the PA, PB, PC, or PO terminals,
DO NOT connect a solid wire and a stranded wire to the same terminal.
Note: The VI, RX, and RR analog input terminals are referenced to CC.
The AM, FM, and II analog input terminals are referenced to the respective negative
terminals.
The FP, PP, and P24 output terminals are referenced to CC.
Note: See
Figure 2 on pg. 15
30
for an alternative ST-to-CC activation configuration.
WX9 ASD Installation and Operation Manual