F101
Speed Reach Frequency
Program Terminal Reach Settings
The Speed Reach Frequency sets a frequency threshold that, when reached or
is within the bandwidth specified by the Speed Reach Detection Band (F102),
activates the assigned discrete output terminal for the duration that the ASD
output is within the
F102
bandwidth.
Speed Reach Detection Band
Program Terminal Reach Settings
This parameter sets the bandwidth of the Speed Reach Frequency (F101)
setting.
78
Direct Access Number — F101
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — Yes
Minimum — 0.0
Maximum — Upper-Limit Freq. (F012)
Units — Hz
Direct Access Number — F102
Parameter Type — Numerical
Factory Default — 2.5
Changeable During Run — Yes
Minimum — 0.0
Maximum — Upper-Limit Freq. (F012)
Units — Hz
WX9 ASD Installation and Operation Manual
F102