Changing Fax Rx Mode And Setting The Action When Receiving A Fax - Canon MF264dw II User Manual

Hide thumbs Also See for MF264dw II:
Table of Contents

Advertisement

Changing Fax RX Mode and Setting the Action when
Receiving a Fax
You can change the RX mode from the default setting.
When [Fax/Tel (Auto Switch)] is enabled to determine whether the incoming call is a fax, you can also configure
settings such as the ring time.
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
1
On the control panel, press [Fax] in the [Home] screen.
2
Press [RX Mode].
The [RX Mode] screen is displayed.
3
Select the RX mode.
When Using the Machine without Connecting a Telephone or the Optional TELEPHONE
6 KIT
Select [Auto]. Used for fax only.
Faxes are automatically received.
Incoming telephone calls cannot be answered.
When Connecting a Regular Telephone or TELEPHONE 6 KIT
When Automatically Receiving Faxes
Select [Fax/Tel (Auto Switch)]. Enables use of both fax and phone.
Faxes are automatically received.
When a telephone call is received, the machine rings. Pick up the handset to answer the call.
When Manually Receiving Faxes
Select [Manual]. Enables use of both fax and phone.
The machine rings when receiving both fax and phone calls.
If you hear a fax tone when picking up the handset, receive the fax manually.
You can also configure the setting to receive faxes automatically after the machine rings for a certain
period of time.
When Connecting an Answering Machine
Select [Answering Machine]. Enables use of both fax and phone.
Faxes are automatically received.
When a telephone call is received, the answering machine function can be used to record messages. You
can answer the call by picking up the handset before recording starts.
* Set the answering machine so that the recording function activates after the machine rings one or two
times.
* When recording your message, it is recommended that you keep about four seconds of silence, or keep
the entire message within 20 seconds.
4
Set the ring time and action when receiving a fax, and press [Apply].
[Switch to Auto RX](P. 496)
Faxing
265
[Home] Screen(P. 116)
Receiving Faxes(P. 283)
8WFY-05E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mf267dw ii

Table of Contents