How To Set Up Mapping Settings; How To Set Up Mapping When The Fieldfox Is On The Lan - Keysight Technologies FieldFox A Series User Manual

On–the–Box Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option 233 on
N991xB), GPS (Option 307) and GPS Receiver (Option 307))

How to Set Up Mapping Settings

How to Set Up Mapping Settings
IMPORTANT! See also,
This section reviews the steps in setting up an Option 352 Mapping
measurement.
This section consists of:
—
—
Figure 15-12 Overview – Setting Up Option 352 (Indoor Mapping) Using Other Modes
—
Figure 15-13 Overview – Setting Up Option 352 (Outdoor Mapping) Using Other Modes

How to Set Up Mapping When the FieldFox Is On The LAN

If your FieldFox is connected directly to the LAN, you can view your maps by
using OpenStreetMaps directly (i.e., no need to use the FieldFox Map Support
Tool to download the maps as a *.zip file). Refer to
page
390
"Alignments" on page
"How to Set Up Mapping When the FieldFox Is On The LAN"
"Option 352 Indoor Maps Setup Procedure"
"Option 352 Outdoor Maps Setup Procedure"
391.
180, in SA mode.
(Requires GPS Option 307)
"Display a Map File" on
Keysight N9927-90001 User's Guide