How To Playback A Session - Keysight Technologies FieldFox A Series User Manual

Table of Contents

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)

Record/Playback (RTSA Option)

During recording, choose from the following:

How to Playback a Session

— Press Trace 6

— If the session is already open, skip the following step. Otherwise:

If these are large recordings on a device, it could take several seconds for

the FieldFox to display the list.

end of the recording is reached, playback begins again at trace 1 and

continues to loop indefinitely.

During playback, choose from the following:

Keysight N9927-90001 User's Guide

Recall Session

Recorder Player

is displayed in the left of screen graticules.

Pause Resume

Temporarily halts recording until pressed again. The

incoming trace continues to sweep. Press again to continue recording.

Immediately stops recording. Then choose from the following:

to start replaying the recording from the beginning.

to continue recording.

Press to insert a User Tag at the current recorded trace. This

allows you to quickly move to this location during playback. Learn more in

About State and User Tags in

Record Playback Setup

Recall Session

Recorder Player

is displayed in the left of screen graticules during playback. When the

Pause Resume

Temporarily halts playback. Then choose from the

Pause Resume

and select a session.

"About State and User Tags" on page

Then select a session to playback and press

Press to continue playing.

Table of Contents