Save 5: Save The Log Results - Keysight Technologies FieldFox A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Set Up Over–the–Air (OTA) Mode Settings
7. Press
Playing a Recorded Log and Viewing the Data
To play the log results:
1. Press
2. Press
3. Optional: Press Scale/Ampltd
4. Press
To pause the log play:
1. Press
2. Press

Save 5: Save the Log Results:

Two file types are supported for save or recall log results:
— KML file format
— CSV file format. Files stored into this format can be imported into
Procedure:
1. Press When done press Stop.
312
Back >Back
Playback > Recall Logs
And, use the Use the RPG or the
played.
Recall File >Play
Then choose:
— Optional (Bar Chart and Spectrum only): To adjust the following, use
the RPG (fine adjust) or the
change the color bar.
— Ref Level
Chart, Strip Chart, and Spectrum.
— Red Limit
— Blue Limit
Stop to exit the log playing.
Pause Resume to pause or resume the log playing.
— Optional: When the recording is paused, press
specify the trace number of the recorded data log to display when
playback is paused.
Stop to stop the log playing.
— Files stored in this format can be imported into 3rd party applications
like Google Earth or Google Maps.
spreadsheet applications.
arrow keys to highlight the file to be
arrow keys (coarse adjust) to
to change the top reference position in the Bar
to change the color bar.
to change the color bar.
Keysight N9927-90001 User's Guide
PlayTrace ID to