Playback Configuration; Manage Sessions - Keysight Technologies FieldFox A Series User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
— Data is ALWAYS played back into the same trace number that was

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on
the screen. The following setting allows you to slow playback. In addition, you
can manually scroll through individual traces using Playback Trace, or scroll
through State and User Tags using Playback State/Tag. Learn more in How to
Playback a Session in
To slow playback of a session:
— Record a new session or Open an existing session.
— Press
— Then
— Enter a value in seconds between 0 (no delay) and 100 using the numeric
— Press

Manage Sessions

— Press Trace 6
— Then
— Then
— Then
— Then choose from the following:
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
— Then choose from the following:
254
recorded. If four traces were active during the recording, but only one trace
was recorded, then during Playback only that one recorded trace is visible.
"How to Playback a Session" on page
Playback Configuration
Playback Interval
keypad, arrows, or the rotary knob. After using the keypad, select a
multiplier key. Learn about multiplier abbreviations.
Enter
Record Playback
Record Playback Setup
when a session is NOT open.
Storage Device to select the media which stores the sessions to be
managed. This is a different setting from the Save/Recall Storage Device
setting.
— Internal FieldFox memory (default)
— SD Card An external SD Card (must be inserted)
— USB An external USB flash drive (must be inserted)
Manage Sessions
The following selections are available ONLY
Keysight N9927-90001 User's Guide
251.