Save And Reset Preferences; Global Settings (Overview) - Keysight Technologies FieldFox A Series User Manual

Table of Contents

System Settings

Save and Reset Preferences

All preference settings can be made at one time from the Quick Settings table.

All settings that can be saved as preferences (except Battery Saver and Startup

Mode) can also be made from individual softkey selections throughout the

FieldFox menu structure. However, they remain through a FieldFox shut down

ONLY when the current settings are saved as preferences.

The table above shows a list of all of these settings and where they are

discussed in this User's Guide.

How to save current settings as Preferences

— Using softkeys, configure the settings as you would like them to remain.

— Press System 7

Choose the Global Settings values (Language, Batter Saver, and Startup

Mode). See also

How to select Global Settings:

— Press System 7

— Then use arrow softkeys or the knob to select Global Settings

Keysight N9927-90001 User's Guide

Save Current Settings

Reset Preferences

"Quick Settings Table" on page

for each of the following:

— Language (see)

— Batter Save Mode (see)

——Off (default)

— Startup Mode (see)

(for each change in setting)

There is a beep when your settings have been

to restore the factory default settings.

Table of Contents