Option 352 Indoor Maps Setup Procedure - Keysight Technologies FieldFox A Series User Manual

On–the–Box Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option 233 on
N991xB), GPS (Option 307) and GPS Receiver (Option 307))
How to Set Up Mapping Settings

Option 352 Indoor Maps Setup Procedure

1. Set up your measurements in Channel Scanner, OTA, or Phased Array
2. Plan your Indoor Map:
Importing floor plans can be imported now or after the indoor map
locations have been measured.
3. If you are using an antenna with your measurements, then Connect your
4. Set up Record Playback: Optional: Auto-Save and distance/time or
392
Antenna. See also, Chapter 12, "Over–the–Air Measurements (OTA) – LTE
FDD Option 370 and 5GTF Option 377 (CPU2 Only),"
"Channel Scanner (Option 312)."
One or more are required:
— For setting up a phased array antenna, refer to
Rapid Prototype Phased Array Antenna – Option 360."
— For setting up a USB antenna, refer to
(Full Capability Requires EMF Option 358, and SA mode (Option 233
Mixed Analyzers))."
Optional:
— For setting up GPS Option 307, refer to
Settings," and then
a. Save mapping pictures to the FieldFox using USB storage device, SD
card, or connect to LAN with internet and download.
b. Import floor plans or site maps to the FieldFox from pictures (PNG,
JPG, and BMP).
Press System 7 >
c. Recommended: Do an interactive Walk Test data collection using
the location pointer.
equipment similar to Figure 1 on page 333
Prototype Phased Array Antenna – Option 360"
page 366 in Chapter 14, "USB Antennas – (Full Capability Requires EMF
Option 358, and SA mode (Option 233 Mixed
Choose distance and manual drive or walk:
a. Press Record Playback
— Press Interval Type Time Distance
— Press Time Interval
ks (maximum) or
press Distance Interval
10 km (maximum)
Chapter 14, "USB Antennas –
Chapter 29, "System
"GNSS (GPS+) and GPS" on page
Mapping > Map Explorer (Get Maps)
in Chapter 13, "5G Rapid
Analyzers))".
> Record Settings
(default = 10.0s) – 1.0s (minimum) to 3.5
(default = 10.0m) – 1.0m (minimum to
Keysight N9927-90001 User's Guide
and Chapter 26,
Chapter 13, "5G
650.
or to Figure 14-1 on
> Meas Interval ON then
(select one of these)