Keysight Technologies FieldFox A Series User Manual page 320

Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Set Up EMF Settings (Requires EMF (Option 358))
6. Verify EMF in 5G NR Mode:
Figure 12-20 Example Summing of Triaxial Values
320
a. Press Mode > OTA
b. Press Meas Setup 4 >
(i.e., For this example. Other units are selectable.)
For more information:
— Refer to Figure 12-20 on page
— See also "Utilities" on page
> 5G NR then
More > EMF > dBuV/m
320.
630.
Keysight N9927-90001 User's Guide