Step 3. Modify Scale And The Display Color Bar Settings - Keysight Technologies FieldFox A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 12-15 Spectrum and Strip Chart Display Type – 5GTF

Step 3. Modify Scale and the Display Color Bar Settings

To assign colors to low and high power values:
1. Press
2. Press
3. And, then press
Keysight N9927-90001 User's Guide
Scale/Amptd >
color.
Blue Limit to set low power values and to set the color.
System
or other display colors. See also
Red Limit to set high power values and to set the
> Display > Display
Chapter 29, "System Settings."
Colors, to set Indoor, Outdoor,
309