Fft Gating (Opt 238) - Keysight Technologies FieldFox A Series User Manual

SA (Spectrum Analyzer) Mode
SA Mode Settings
Trigger Settings Annotation
Trigger settings are annotated on the FieldFox screen as highlighted in
the following image:
— Square: Trig Type (VidT), AutoTrigger (a), Pos Slope (/), Neg Delay (delay-)
— Horizontal arrow: Trig Level (green horizontal graticule at -20 dBm)
— Vertical arrow: Trig Position T-zero indicators (green arrows at 2nd vertical

FFT Gating (Opt 238)

Time-gated spectrum analysis allows you to obtain spectral information about
signals occupying the same part of the frequency spectrum that are separated
in the time domain. Using an external trigger signal to coordinate the
separation of these signals, you can perform the following operations:
— Measure any one of several signals separated in time; for example, you can
Keysight N9927-90001 User's Guide
—OFF: Select, then enter a position value from 0 to 10 using the numeric
keypad, the
——0: T-zero occurs at the left graticule.
——5: T-zero occurs at the center of the screen.
——10: T-zero occurs at the far right graticule.
— Then press Enter.
graticule)
separate the spectra of two radios time-sharing a single frequency.
arrows, or the rotary knob.
red in
175