Keysight Technologies FieldFox A Series User Manual page 124

Calibration for NA, CAT, and VVM Modes
The following appears:
Choose Calibration Method screen
— Response Cal – Used to quickly calibrate ONE type of measurement using
— Quick Cal – Using built-in cal standards and CalReady, quickly and
— Mechanical Cal/ECal – Using mechanical cal standards from a cal kit,
— User Cal OFF ON – Turns ON and OFF the effects of the user calibration that
— View Cal – Shows the properties of the current calibration. Learn more in
— More – Learn about Cal Ready Properties in
124
mechanical standards. Measurement accuracy is generally low. Learn more
in "Simple Response Cals " on page
accurately calibrate measurements when using a jumper cable or adapter
to connect the DUT to the FieldFox test ports. Learn more in
(N991xA/2xA/3xA Only)" on page 125
perform an accurate calibration at one or both test ports, adapters, or
jumper cables. Full 2-port mechanical calibration is the most accurate
calibration available with FieldFox. Learn more in
you performed. The OFF state reverts to CalReady.
"View Cal" on page 134.
132.
"ECal" on page
"CalReady" on page
Keysight N9927-90001 User's Guide
"QuickCal
130.
123.