How To Record A Session - Keysight Technologies FieldFox A Series User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
In addition, you can insert a 'User Tag' at any time during a recording session
to indicate an external event, such as when an antenna is moved. During
playback, you can move quickly to any of these tags, or scroll through these
tags.
A symbol is used on the screen annotation to distinguish a User Tag from a
State Tag when scrolling through tags during playback.
Screen Annotation
During a record or playback session, the following is displayed in the top-left
area of the screen:
—
where:
—
—
—
—
—
When GPS is enabled`, the current location and elevation are annotated at the
bottom of the playback display. Learn more in
page
If Recording or Playback is not occurring when you think it should, check
the following:
— Is the sweep in HOLD? (upper-left annotation), or check the Sweep
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration

How to Record a Session

— Press Trace 6
— Then
— Then either:
250
AutoSession02: 92/95 (state 4/5)_*_
Sep.22.2018 09:15:15 AM
AutoSession is an auto-generated name for sessions.
auto-generated number, incremented with each new session. The name
can be changed using Manage Sessions. Learn more in
on page 254.
92/95 is the current and total trace number: currently trace is 92 of 95 total
traces.
state 4/5 is the current and total state tag or user tag number: 4 of 5 total
tags.
* (Asterisk) indicates that a state has changed.
User Tag has been inserted.
Sep.22... is the date and time of recording.
650.
menu for Continuous set to OFF.
settings.)
Record Playback
02 is the
"Manage Sessions"
# (Pound) indicates that a
"GNSS (GPS+) and GPS" on
Keysight N9927-90001 User's Guide