Security Level - Keysight Technologies FieldFox A Series User Manual

System Settings
System Configuration
How to make Voltage Source settings
— Press System 7
— Then
— Then
— Then
— Then Voltage x.xx V Using
—
—

Security Level

For security reasons, you can prevent frequency information from appearing on
the FieldFox while in SA, NA, or CAT modes.
How to set Security Level
— Press System 7
— Then
— Then
— Then choose from the following:
Keysight N9927-90001 User's Guide
System Configuration.
Voltage Source.
Source ON OFF to enable and disable the voltage source output.
keypad, enter a value between 0.001 and 32 volts.
Clear Overload If the voltage source becomes 'TRIPPED' press to re-enable
the voltage source output. Then set
Status Line ON OFF Turn ON and OFF the voltage source status line that
appears near the top of the screen. The status line is always ON while
making Voltage Source settings.
System Configuration
Security Level
— None All frequency settings are visible.
— High Frequency information is blanked from the following:
——Display annotation
——Softkeys
——Marker display and marker table
——Calibration properties
——All settings tables
——Limit line tables
——All saved.png files
— Any of the following will re-display frequency information:
——Set to None, Preset, Mode Preset, or FieldFox restart.
arrows, the rotary knob, or numeric
Source ON.
657