Set File Type And Select Device - Keysight Technologies FieldFox A Series User Manual

File Management
Saving and Recalling Files
How to move a file
— Press Save/Recall 9
— Then
— Then
— Then
— Then
— Navigate to the file(s) to be copied using the Up/Down arrow keys or the
— Then
— Use the close folder icon or the open folder icon to locate the target folder
— Then
—

Set File Type and Select Device

The following File TYPE and DEVICE settings are used to determine the type of
file to save, and the location to be used for all file operations.
These two settings remain through an instrument preset, but are reset to the
default values when the FieldFox power is shutdown.
Select Device (location of File Save/Recall)
— Press Save/Recall 9
— Then
Keysight N9927-90001 User's Guide
Device to be copied from (i.e., Internal, SD, or USB). Refer to
File Type and Select Device" on page
More
Manage Files
Select Files
knob.
Copy
— Select the destination device using the softkeys:
—— Copy to Internal
—— Copy to USB
—— Copy to SD Card
——Cancel to cancel copy file and return to the previous menu
for your files.
Do Copy copies files to selected location and FieldFox displays a
confirmation message of a successful file copy.
Cancel to cancel copy file and return to the previous menu.
Device to set the LOCATION where the file is to be saved, recalled, or
moved. Choose from the following:
— Internal Saves/Recalls/Moves (Copies) files to/from the FieldFox
internal memory. To specify a folder, first select Manage Folders
(learn how in "Manage Folders" on page
will read data ONLY from the \UserData folder.
677.
Copies to FieldFox's internal memory.
Copies to a USB memory device.
Copies to a SD/SDHC memory card.
682). The Data Link software
"Set
677