Keysight Technologies FieldFox A Series User Manual page 300

Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 12-7 Single cell selected, but other cells displayed when CC0 to CCn has been
enabled. If ALL is selected, only the CC with the highest power is displayed.
(Not all of the detected data is displayed.)
Figure 12-8 Example of the LTE FDD Scan Results Table (Five CCs and one cell)
1. When multiple component carriers are selected, the results of the component carrier (CC) with the highest
power is displayed.
300 Keysight N9927-90001 User's Guide
1