Keysight Technologies FieldFox A Series User Manual page 374

USB Antennas – (Full Capability Requires EMF Option 358, and SA mode (Option 233
Mixed Analyzers))
How to Set Up a USB Antenna
Editing Antenna Correction Factors and Adding New Antenna Factors
Keysight does not recommend editing a USB antenna's correction factors.
If New is selected under the X, Y, or Z Antenna or Cable softkey menu,
whatever antenna or cable factors that have been imported as the default
values and are displayed in the Settings table.
For procedures illustrating how to edit the Antenna Factors settings table
values, refer to:
— SA Mode:
— OTA Mode:
Figure 14-6 SA Mode – Example Editing and Adding a New X axis antenna
374
"How to Set Up EMF Settings (Requires EMF (Option 358), GPS
(Option 307), and SA Mode (Option 233–Mixed Analyzers))" on page 206
"How to Set Up EMF Settings (Requires EMF (Option 358))" on
page 315
Keysight N9927-90001 User's Guide