Recall Files; Move (Copy) Files - Keysight Technologies FieldFox A Series User Manual

Table of Contents

File Management

Saving and Recalling Files

— If the filename already exists, you are prompted to choose from the

Recall Files

The FieldFox can recall State files, Trace + State files, and image files.

ALL FieldFox instrument settings for ALL Modes are saved and recalled in a

*.sta file. If error correction is ON in CAT or NA Mode, then calibration data is

also saved and recalled.

If error correction is OFF (CalRdy is active), calibration data is NOT saved in the

*.sta file. When a Trace + State file is recalled on a FieldFox other than the one

it was saved on, differences in the CalRdy calibration data may result in

differences between the displayed traces.

The FieldFox can open and display *.png, *.jpg, and *.jpeg images.

How to Recall a File

Before recalling a file, first Select the Device and Location from which the

file will be recalled. See the following section for more information.

— Press Save/Recall 9

— Navigate to the file to be recalled using the Up/Down arrow keys.

The FieldFox can Move files (i.e., including Trace + State files, and image files).

to overwrite the existing file.

to return to edit the filename.

Sort by Name

Sort by Date

if available, to go to the next page of filenames.

to cancel recall file and return to the previous menu.

to list the current files by name.

to list the current files by date.

if available, to go to the previous page of

Keysight N9927-90001 User's Guide

Table of Contents