Amplitude Markers; Marker Search - Keysight Technologies FieldFox A Series User Manual

Pulse Measurements Mode – Option 330
Pulse Measurement Settings

Amplitude Markers

Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
— Press Marker
— Then
— Then
— Then choose from the following:
— Then
— Enter a value in dBm for the marker using the numeric keypad, the
— Press
— Then choose from the following:

Marker Search

Use Marker Search to find and move markers to locations on the Tr 1 trace.
How to Search with Markers
— Activate the marker to be used for the search
— Then press Mkr ->/Tools.
— Then
— Then
— Then choose from the following:
480
More
Ampl Markers
— OFF Amplitude markers are NOT displayed.
— ON Amplitude markers ARE displayed at their previous positions.
Ampl Mkr 1 or 2
arrows, or the rotary knob.
Delta Ampl Mkr
— ON AmplMkr 2 value is relative to AmplMkr 1. When AmplMkr 1 is
moved, AmplMkr 2 also moves to maintain the AmplMkr 2 value
between them.
— OFF The two amplitude markers move independent of one another.
Marker Search
Zone Search
— ON Available ONLY when the zoom window is enabled, the search is
limited to the zone defined by the zoom window.
— OFF
The search is performed over the entire Tr 1 trace.
Keysight N9927-90001 User's Guide