Tdr (Time Domain Reflectometry) - Option - Keysight Technologies FieldFox A Series User Manual

Keysight Handheld Analyzers
N99xxA User's Guide
5

TDR (Time Domain Reflectometry) - Option 215

CAT Mode Time Domain Reflectometry (TDR) measurements are generally
used to locate problems, and identify the type of problem, in a length of cable
or transmission line.
Settings that are NOT unique to TDR measurements are documented in
Chapter 3, "CAT (Cable and Antenna Test) Mode", on page
In this chapter, the cable to be tested is referred to as the DUT (Device Under
Test).
In this Chapter
"TDR Measurement (Format)" on page 74
"TDR Settings Table" on page 74
"TDR Start and Stop Distance" on page 75
"TDR Sweep" on page 75
71
45.