Keysight Technologies FieldFox A Series User Manual page 107

NA (Network Analyzer) Mode
NA Mode Settings
— Font Size – Choose either Big or Super Big. Super Big marker readout #3
— Trace Settings - For each possible trace (1, 2, and 3) select from the
— Big Readout - For each marker readout (1, 2, and 3), select from the
Notes:
— To move a marker, press Marker, then Marker, then scroll to the marker
— Settings that are NOT listed above are NOT affected by the recalled display
— Changes to the above settings outside the Big Readout menu will be
Keysight N9927-90001 User's Guide
will cover some of the measurement grid.
following:
—Measurement – S-Parameter or Receiver measurement to display.
S11 is default. Learn more in
—Meas Format – Log is default. Learn more in
— Bandwidth (ON) – Marker readout for marker bandwidth search.
OFF is default. Learn how to set BW parameters in
with Markers" on page
following:
—Marker # - Enter a number from 1 to 6 to create the marker. 1 is
created by default.
—Trace # - The marker# is created on this trace. Tr1 is selected by
default. The corresponding Num Traces must first be selected. For
example, to create a marker on Trace 3, first select Num Traces = x3.
—Format – Format for the marker readout. Select Default to make the
marker readout format the same as the display format. Default is
selected by default.
— Mkr Tracking – ON: Select the parameter to track on the standard
Marker Search menu. OFF is selected by default. When set to ON,
Peak tracking is set by default. Learn about Marker Tracking in
"Marker Functions" on page
— State – Choose from Normal, Delta, or OFF. The default marker (1) is
created in Normal. Learn more in
—Enabled – Turns the Big Readout of the corresponding marker ON and
OFF. The default marker (1) is set ON by default.
number to be moved. The new marker position can NOT be saved with the A
or B display state.
states.
overwritten when Big Readout (A or B) is selected. For example, suppose
the display format for the B state is Log. If you change the display format to
Lin using the standard menu (Meas 1, Format), the setting will show on the
display. But if you then use the Big Readout (A | B | OFF) setting, when B is
recalled, the Lin setting will be overwritten with the original Log setting.
"About S-parameters" on page
"Format" on page
604.
611.
"Marker Functions" on page
87.
94.
"How to Search
611.
107