How To Install Node.js And Running The Fieldfox Mapping Software - Keysight Technologies FieldFox A Series User Manual

Table of Contents

On–the–Box Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option 233 on

N991xB), GPS (Option 307) and GPS Receiver (Option 307))

How to Install Node.js and Running the FieldFox Mapping Software

IMPORTANT! If your FieldFox is connected directly to the LAN, you can skip

the section on downloading Node.js and go to

When the FieldFox Is On The LAN" on page

This section contains the procedure to download Node.js to access

OpenStreetMap files and to process and save those files using the FieldFox

mapping software. For details on how to use those on files once they are

downloaded to the FieldFox, refer to

1. Open an HTML5 compatible browser and download Node.js to a PC (e.g.,

Do not change the default name of the directory path for downloading the

Node.js program, because FieldFox uses the default program path name to

run the Mapping feature. Refer to

Examples of Web Browsers that not supported are Internet Explorer 6, 7,

2. Run the Node.JS installation file, by accepting the wizard's defaults (i.e.,

Google Chrome, Mozilla Firefox, Safari, or Microsoft Edge):

https://nodejs.org/en/download

including leaving the "Automatically install the necessary

tools. Note that..." checkbox unchecked). Refer to

Figure 15-5 on page

"How to Set Up Mapping

"How to Set Up Mapping Settings" on

Keysight N9927-90001 User's Guide

Table of Contents