Keysight Technologies FieldFox A Series User Manual page 690

Table of Contents

Working with the Lithium-Ion Battery

Charging the Battery

Figure 32-1 AC/DC Adapter

To charge a battery inside the FieldFox, insert the AC/DC adapter plug into the

Power connector on the FieldFox side panel, then plug the adapter into an AC

— FieldFox ON: Charging is indicated by a battery icon in the upper right of

— FieldFox OFF: Charging is indicated by the FieldFox power LED glowing

the front panel screen.

amber, with its intensity increasing from dim to bright every few seconds.

This pattern repeats until the LED turns off when charging is done. Learn

Chapters

Table of Contents