How To Record - Keysight Technologies FieldFox A Series User Manual

On–the–Box Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option 233 on
N991xB), GPS (Option 307) and GPS Receiver (Option 307))
How to Record/Playback (Option 352)
Figure 15-22 Field Strength Annotation that can be Recorded and Played Back
If Recording or Playback is not occurring when you think it should, check
the following:
— Is the sweep in HOLD? (upper-left annotation), or check the Sweep menu
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration settings.)

How to Record

Record-Play files are saved to:
—
— Press Measure
— Then
406
for Continuous set to OFF.
Record-Play files are save-recalled to:
"[CurrentDevice]\
RecordPlayback\Maps
Data Logging
\"
Keysight N9927-90001 User's Guide