Keysight Technologies FieldFox A Series User Manual page 214

SA (Spectrum Analyzer) Mode
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
214
— Press Edit Antenna
press New
your existing antenna 's file (i.e.,
data? is displayed above the table).
— Choose
— Choose
— Press Add Row
Factor values.
— Press Delete/Clear
—
—
—
— Press Done
c. Press Save Antenna
Naming Options" on page 645
on page 645.
For more information:
— See also "GNSS (GPS+) and GPS" on page
to edit your existing antenna factors or
to add a a new antenna's factors or to write over
Yes to write over the existing antenna file.
No to create a new antenna file (default
filename is Example).
to create additional Frequency and Antenna
then choose one of these:
Delete Row – when pressed this choice deletes the
currently selected row of Frequency and Antenna
Factors (i.e., you must press
No to exit the current softkey menu).
Clear All – when pressed this choice deletes all of
the currently selected rows of Frequency and
Antenna Factors (i.e., you must press
the rows or No to exit the current softkey menu).
Back – To exit to previous softkey menu.
when finished editing to exit.
to save your changes. See also
and then to
Keysight N9927-90001 User's Guide
Overwrite existing Antenna
Yes to delete a row or
Yes to deleted
"File Saving
"Alpha Numeric Editing"
650.