Setting Up Data Logging - Keysight Technologies FieldFox A Series User Manual

On–the–Box Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option 233 on
N991xB), GPS (Option 307) and GPS Receiver (Option 307))
How to Set Up Mapping Settings

Setting up Data Logging

— Enable the Data Logging settings:
Record-Play files are saved to:
Learn more about file settings, refer to
— If recording, then:
Keysight N9927-90001 User's Guide
— Press Trace 6
— To set Data Logging
——Record or
——Play or
——Save Recall Rec-Playback
recordings.)
——Save Log File
——Recall Logs
——User Folder Def System
——File Type
Record-Play files are save-recalled to:
——
"[CurrentDevice]\RecordPlayback\Maps\"
——Record Settings
——Optional: Then
——Then
——Then, if applicable
seconds.
Or
——Then, if applicable
interval in miters.
——Then
——Then
— Pause Resume Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue
recording.
— Stop Immediately
(Indoor)—choose:
(If you have previously stored data
or
or
(Default = Default) or
(Default = KML) CVS or DREC
Chapter 31, "File Management."
then choose:
Meas Interval
Interval Type > choose Time or Distance.
Time Interval
Distance Interval
Auto Save OFF ON (Default = ON).
Back
> ON
enter time interval in
enter distance
403