How To Playback - Keysight Technologies FieldFox A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Use Data Logging (OTA Options 370 and 377)
— Optional: Then
— Then
Learn more, refer to

How to Playback

— Press Measure 1
— If the session is already open, skip the following step. Otherwise:
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
—
324
Meas Interval
— Then Interval Type
— Then, if applicable
Or
— Then, if applicable
File Settings
— Then File Name
— Then Device (Internal (default), SD Card, or USB)
— Then File Type (CSV or KML (default))
— Then File Overwrite
Overwrite.
— Then Back > Back
Chapter 31, "File Management."
Record Playback
— Then Playback
— Then Recall Logs
——The Recall File
— Then Play to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume Temporarily halts playback. Then choose from the following:
— Pause Resume
Stop Immediately stops playback. Then choose from the following:
> ON
> choose Time or Distance.
Time Interval enter time interval in seconds.
Distance Interval enter distance interval in miters.
(OFF or ON (default)) – Enable/Disable File
Press to continue playing.
Keysight N9927-90001 User's Guide