Table of Contents
Advertisement
Cart
To install the combination lock:
STEP 1
STEP 2
STEP 3
Rev 1.00
Take out of the combination lock connected with the cart via the
coiling cable (1 in Figure 6-10).
Figure 6-11: The combination cable lock
Rotate the combination number (2 in Figure 6-10) to the number
previously set for the lock, for example, the initial combination
0000.
Press and hold the push button (5 in Figure 6-10).
The T-bar (6 in Figure 6-10) is automatically rotated 90°. If the combi-
nation number set in step 2 is wrong, the push button cannot be
pressed and the T-bar will not be automatically rotated. When you
release the push button, the T-bar will be automatically turned back
to its original position.
Chapter 6 - System Description
89
Advertisement
Table of Contents
