Switch On/Off The Unit - Whale PE-12-025 User Manual

Chapter 4 - Start-up
STEP 2
4.3

Switch on/off the unit

To switch the unit on
STEP 1
STEP 2
To switch off the unit
When the Portable Ultrasound Diagnostic Scanner is powered off, the unit
will enter an automatic shutdown process.
60
Lift the unit from the cart guide.
Figure 4-6: The Cart Power Interface
AC Adapter: Plug in the AC Adapter power cable
Printer A: Plug in the power cable of Digital Graphic Printer
Printer B: Plug in the power cable of Video Printer
Do not place the cart into a corner where it is difficult to reach the
CAUTION
power switch.
Make sure the unit has power.
Press On/Off button on the top right corner of control panel. After
initialization the default scanning screen (2D Mode) is displayed, us-
ing the active probe. If the battery is too weak, the corresponding
message will display on the screen. When using the AC power
adapter, the system can be used regardless of the battery level and
the battery will be automatically charged.
Full shutdown: the whole system is shut down. The operating process
as below:
Portable Ultrasound Diagnostic Scanner User Manual
Switch on/off the unit