Table of Contents
Advertisement
Preset
Select the default dataflow
STEP 1
STEP 2
STEP 3
Adjust the assigned devices
STEP 1
STEP 2
STEP 3
Table 7-68: The Device Specific Parameters
Device
Worklist
Dicom Storage
Rev 1.00
Select the dataflow in the Name drop-down menu.
Check the Default box.
The dataflow will be selected by default after unit restart.
Select the device in the Selected devices field.
Press Properties. The Properties window is displayed.
Adjust the device specific parameters as desired (see table below).
Settings
IP Address
Name
AE Title
Port
Timeout
IP Address
Name
AE Title
Port
Allow Multiframe
Max Framerate
Compression
Quality
Chapter 7 - System Operation
Definition
Select from drop-down
menu.
Free text: give a descriptive
name for the device.
The Application Entity Title is
set during DICOM
The Port no. is allocated
during DICOM configuration.
Set the timeout duration of
the connection.
Select from drop-down
menu.
Free text: give a descriptive
name for the device.
The Application Entity Title is
set during DICOM
The Port no. is allocated
during DICOM configuration.
Allow cineloop storage.
Select 25, 30 or Full from the
pop-up menu. Full (original
acquisition) is default.
Select compression type or
no compression.
Set picture quality from 0 to
100%. Lower picture quality
level allows higher data com-
pression, while higher picture
quality lowers the compres-
sion.
235
Advertisement
Table of Contents
