Printers; Replaceable Fuses; Operation Environment; Operate Room Condition - Whale PE-12-025 User Manual

Chapter 3 - Specifications
STEP 3
STEP 4
STEP 5
STEP 6
3.5

Printers

Sony UP-D897
Mitsubishi P93
3.6

Replaceable Fuses

Table 3-3: Replaceable Fuses
Manufacturer
Littelfuse Inc
3.7

Operation Environment

The Portable Ultrasound Diagnostic Scanner must operate within the proper
environment and keep consistent with the requirements described in this
section. Before using the unit, ensure that all requirements are met.
This unit can operate optimally by implementing the following require-
ments:
3.7.1

Operate Room Condition

Ensure that there is sufficient air flow around the Portable Ultrasound Diag-
nostic Scanner when installing or operating.
42
Pull the probe and connector straight out of the probe port.
Carefully slide the probe and connector away from the probe port.
Ensure the probe cables are free.
Ensure the probe head is clean before putting it in its storage case.
The printers can only be powered from the respective port provided on
CAUTION
the cart. Do not connect the printer to other power sources.
Model
219XA
The same fuse model as specified should be used for fuse replacement
WARNING
to avoid risks.
Portable Ultrasound Diagnostic Scanner User Manual
Technical data
5*20mm, 6.3 A, 250V
Printers