Table of Contents
Advertisement
Probe/Application
STEP 5
7.3
Probe/Application
Probes and their related applications are selected from the Probes and ap-
plications pop-up menus as described below. Only probes currently con-
nected are displayed in the Soft menu. Only applications appropriate for the
type of probe selected are shown.
To select a probe and an application
STEP 1
STEP 2
STEP 3
Rev 1.00
Click OK to save the changes and close the Export dialog.
Note: The file is saved in the PDF format.
Press Application key on the control panel. The All Probes window
pops up. A list of the connected probes is displayed.
Figure 7-18: All Probes Window
Move the trackball to the desired probe.
Press Set key on the control panel. The Applications window for the
selected probe is displayed.
Chapter 7 - System Operation
115
Advertisement
Table of Contents
