Table of Contents
Advertisement
Preset
Besides, users can customize a default exam that can be selected automati-
cally unless an alternative is specified at the beginning to do a physical ex-
amination.
Rev 1.00
To add an exam to the More list, follow these steps:
Open the Applications dialog ("Config/Diag" > "Exam" >
STEP 1
"Applications").
On the Category drop-down list, select a body part.
STEP 2
On the All Applications list, select the exam that you want
STEP 3
to add to the Applications list, and then click the right arrow
.
On the Applications list, select the body part which has
STEP 4
been selected at the second step, and then click the down
arrow
Note: The exam cannot be directly added to the More list.
Thus, if selecting the exam, you can only change its order in the
Application list by clicking the down arrow
row
Click OK to save the changes and close the Applications di-
STEP 5
alog.
Remove an exam
To remove an exam from the Applications or the More lists, follow these
steps:
Open the Applications dialog ("Config/Diag" > "Exam" > "Ap-
STEP 1
plications").
On the Applications or the More lists, select the exam that you
STEP 2
want to remove, and then click the left arrow
Click OK to save the changes and close the Applications dialog.
STEP 3
Customize a default exam
To customize a default exam, follow these steps:
Open the Applications dialog ("Config/Diag" > "Exam" > "Ap-
STEP 1
plications").
On the Applications list, select the exam that you want to set as
STEP 2
default, and then click Default.
The system will highlight the exam with red.
Click OK to save the changes and close the Applications dialog.
STEP 3
to add it to the More list.
.
Chapter 7 - System Operation
or the up ar-
.
221
Advertisement
Table of Contents
