Probe Inspection; Probe Cleaning And Disinfecting - Whale PE-12-025 User Manual

Chapter 8 - User Maintenance
After Each Use
1
2
3
Before Each Use
1
8.2.2

Probe Inspection

After each use
1
2
Before each use
1
2
3
8.2.3

Probe Cleaning and Disinfecting

Table 8-1: Different probes cleaning and disinfecting requirements
Probe Model
1P4V
2P4V
3P8V
12L5V
2C5V
276
Inspect the probe
Clean the probe
Disinfect the probe
Inspect the probe.
Inspect the lens, the probe housing and the cable.
Look for damage that might allow liquid into the probe.
Inspect the lens, the probe housing and the cable.
Look for damage that might allow liquid into the probe.
Test the functionality of the probe.
If any damage is found, do not use the probe until has been inspected
CAUTION
and released for further use by a qualified service representative.
If any corrosion or discoloration is found, do not use the probe.
CAUTION
Cleaning/Disinfection
Cleaning+ Low-level disinfection
Cleaning+ Low-level disinfection
Cleaning+ Low-level disinfection
Cleaning+ Low-level disinfection
Cleaning+ Low-level disinfection
Portable Ultrasound Diagnostic Scanner User Manual
Probe Care And Maintenance