Ecg Controls; Display The Ecg Curve; Adjust The Display Of The Ecg Curve - Whale PE-12-025 User Manual

Chapter 7 - System Operation
7.7.2

ECG Controls

Press Physic key on the control panel to activate physiological ECG controls.
The physiological ECG controls are displayed on the Main menu of the scan-
ning screen.
Table 7-50: ECG Controls
Parameter
Horizontal Sweep
Gain
Position
ECG
Qrs Visible
7.7.3

Display the ECG curve

7.7.4

Adjust the display of the ECG curve

Adjust the ECG curve sweep speed
STEP 1
STEP 2
Adjust the ECG curve amplitude
STEP 1
176
Description
Adjusts the refresh rate of the physiological curve. This
control is active only in 2D and color modes. The sweep
speed of the physiological curve in M-Mode and Doppler
is identical to the M-Mode or Doppler horizontal sweep
adjusted by the user.
Enables the user to change the amplitude of the physio-
logical curve displayed on the screen.
Enables the user to move the physiological curve on the
screen.
Turns the ECG curve on and off.
Displays the Q wave.
Cardiac application: the ECG is turned on by default in all cardiac appli-
cations.
Other applications:
Press Physic key on the control panel to get access to the ECG
STEP 1
controls.
Press the assignable ECG to display the ECG curve.
STEP 2
Press Physic key on the control panel.
Select the assignable button Horizontal Sweep to change the
sweep speed.
Press Physic key on the control panel.
Portable Ultrasound Diagnostic Scanner User Manual
ECG